Patented top bead uses a tongue and groove system to fix along the top edge(s) of your SPIG-LITEadvanced spigots to create a tidy finish, hiding the internal mechanism of the balustrade system whilst helping to prevent water and debris from getting inside. The installation is then finished with our co-extruded gasket to create a flush finish between the top bead and the glass.
To be used alongside the SPIG-LITEadvanced Spigot.
SPIG-LITEadvanced is compatible with the following glass thicknesses: 12mm/15mm/17.5mm/21.5mm. It is vital that you carefully check the building regulations for your project before choosing your glass thickness. The top bead and gasket supplied will fit all glass thicknesses. If you need assistance determining your glass thickness, please give our team a call.
We stock a small variety of widths of SPIG-LITEadvanced Top Bead & Co-Extruded Gasket which are configured to your glass width selection on a case by case basis. This product is also available in Raw Aluminium (untreated).
Top Bead Dimensions:
H = 41.89mm
L = 107.17mm
1x Length of Top Bead, to suit your glass thickness selection
1x Length of Co-Extruded Gasket
This is available in raw Aluminium, however this will require powder coating or another treatment to stop corrosion.
£1.90 – £2.40