Yes, the profiles can be cut and mitred for corners. You will need to use either a chop saw or mitre saw, you will need to be sure you use an aluminium blade to give a clean cut. Other metal blades can give a rough cut.
Technical Director · PureVista
Yes, the profiles can be cut and mitred for corners. You will need to use either a chop saw or mitre saw, you will need to be sure you use an aluminium blade to give a clean cut. Other metal blades can give a rough cut.
Technical Director · PureVista
Ashley leads the technical team at PureVista, with over 18 years in structural glazing and facade engineering. He is a chartered member of CIOB and sits on the BSI committee for glass in buildings.